Corkjoint JointFlex 25mm | Closed Cell Polyethylene Expansion Joint FillerBoard

CLOSED CELL POLYETHYLENE EXPANSION JOINT FILLERBOARD

Description

CORKJOINT Jointflex® is a closed cell, crossed linked, non-absorbent polyethylene expansion joint fillerboard for use in expansion and isolation joints in concrete and masonry structures. Jointflex® is non-absorbent and has excellent properties allowing it to be used in water retaining and excluding structures where potable, salt, chlorine and sewerage water is present.

Jointflex® has no bitumen content and joint sealant can be directly applied on top of it without the use of a bond-breaker tape. Jointflex® is available in standard 50kg/m³ (low) density and is also available in custom densities of 100kg/m³ (medium) and 150kg/m³ (high).

Supplied in sheet form and at a thickness to suit the joint width or can be custom cut in sheet sizes to suit the concrete thickness or width. Also available upon request with a tear-off cap to suit the joint sealant application depth.

Uses

• Slab on ground

• Brickwork and blockwork

• Reinforced concrete structures

• Concrete roads and pavements

• Basements and tunnels

• Water retaining / excluding structures

• Dams and reservoirs

• Bridges and viaducts

• Suspended slabs Airport aprons and taxiways

Advantages

• Non-absorbent

• Lightweight & durable.No bitumen content

• Ability to compress and recover

• Non-extruding from joint movement

• Suitable for submerged or trafficable joints

• For use with polyurethane, polysulphide, silicone, acrylic and bitumen joint sealants

Tested and conforms to ASTM D1752-18 & ASTM D545-19 standard specification for preformed expansion joint fillerboard paving and structural construction.

Application

Packaging

• 1m (W) x 2m (L) x 10mm (thickness)

• 1m (W) x 2m (L) x 12mm (thickness)

• 1m (W) x 2m (L) x 15mm (thickness)

• 1m (W) x 2m (L) x 20mm (thickness)

• 1m (W) x 2m (L) x 25mm (thickness)